Electric floats

The MAC3 electric float switch enables the automation of electrical equipment (normally pumps, but also solenoid valves, alarms, motorized gate valves, etc.) when a predetermined level is reached. Inside the device is a microswitch that, depending on the liquid level, opens or closes the contact that feeds the electric pump

Float switches allow the automation of electrical equipment (normally pumps, but also solenoid valves, alarms, motorized gate valves, etc.) when a predetermined level is reached. Inside the device is a microswitch that, depending on the liquid level, opens or closes the contact that feeds the electric pump

Float switches allow the automation of electrical equipment (normally pumps, but also solenoid valves, alarms, motorized gate valves, etc.) when a predetermined level is reached. Inside the device is a microswitch that, depending on the liquid level, opens or closes the contact that feeds the electric pump

The ENM10 trim level regulator is specifically designed for use in wastewater, but can be used in all applications that require simple and reliable level detection.
ENM10 is available with 3 standard cable lengths, 6, 13 and 20 meters, and is suitable for operation in fluids with specific gravity between 0.95 - 1.10 g/cm3.
The principle of operation is very simple: ENM10-red is placed in the tank at the desired tripping height, when the fluid reaches the instrument body, it tilts and the internal microswitch is activated, which exchanges the contact position thus activating the pump or the managed utility.
No wear and tear and the only maintenance required is simple periodic cleaning of the instrument.

The ENM10 trim level regulator is specifically designed for use in wastewater, but can be used in all applications that require simple and reliable level detection.
ENM10 is available with 3 standard cable lengths, 6, 13 and 20 meters, and is suitable for operation in fluids with specific gravity between 0.95 - 1.10 g/cm3.
The principle of operation is very simple: ENM10-red is placed in the tank at the desired tripping height, when the fluid reaches the instrument body, it tilts and the internal microswitch is activated, which exchanges the contact position thus activating the pump or the managed utility.
No wear and tear and the only maintenance required is simple periodic cleaning of the instrument.

The ENM10 trim level regulator is specifically designed for use in wastewater, but can be used in all applications that require simple and reliable level detection.
ENM10 is available with 3 standard cable lengths, 6, 13 and 20 meters, and is suitable for operation in fluids with specific gravity between 0.95 - 1.10 g/cm3.
The principle of operation is very simple: ENM10-red is placed in the tank at the desired tripping height, when the fluid reaches the instrument body, it tilts and the internal microswitch is activated, which exchanges the contact position thus activating the pump or the managed utility.
No wear and tear and the only maintenance required is simple periodic cleaning of the instrument.

Float switches allow the automation of electrical equipment (normally pumps, but also solenoid valves, alarms, motorized gate valves, etc.) when a predetermined level is reached. Inside the device is a microswitch that, depending on the liquid level, opens or closes the contact that feeds the electric pump